|
Tech Supply
- We
Understand Steel Mill
Metal Pass has a strong team of engineers and consultants,
each of them usually has 10 to 30 years of experiences after
receiving Ph.D. from USA or Germany. The Tech Supply of
Metal Pass covers a wide range of highly technological
products such as
The
Steel
Plate/Steckle Mill Level 2 was jointly developed by
Metal Pass and one of its partners. Metal Pass, with high
expertise on rolling process models, develops mission-critical
functions such as Level 2
model, while certain less technology-intensive sections, such as
data collection and the interface with Level 1 and Level 3,
etc., are developed by the partner. The
Steel
Strip Mill Level 2 is the version developed by those Metal
Pass employees who have previously developed and supported a
similar Level 2 system for many years in US steel mills. The
Steel Wire Rod Mill Level 2 was firstly customized based on several Level 2 packages
developed by Metal Pass employees for various steel mill
sectors EAF, LMF and Caster, and then extended to add mill
process and product models. The
Misc.
Mill Software and Systems consists of a collection of
miscellaneous mill software packages including Roll pass
software Packages, Level 2 Packages and Support Programs,
Level 3 Models, Industrial Automation System Packages and
General Engineering Software Packages, etc.
The
Wire Rod Mill,
after been ordered,
will be
manufactured by Metal Pass partners based on the key design
of Metal Pass. Metal Pass will supply major technological design
and mill parameter calculation, and provides electric
equipment selection based on the calculation. Metal Pass'
partners will manufacture the mill machinery based on Metal
Pass' calculation, selection and various guidelines.
Metal Pass also supplies various
Mill Auxiliaries, such as
oil-film bearing.
The machinery and equipment are mainly manufactured by Metal
Pass partners under Metal Pass' design or guideline.
As an industrial expert, Metal Pass has rich resources
for the
technological supply
including those
detailed listing of resources available online.
You may view our
company profiles. Please contact
us via email
admin@metalpass.com (preferred) or by phone (001)
503
621 3836 if you need any software
system or mill machinery/equipment mentioned above. |
