Design option Fixed round size, changeable roll dia. Fixed roll dia., changeable round size Fixed all, for pass verification	Unit & dimension Metric English Hot Dimension Cold Dimension
Size and dimension
Reduction Level for pass 1+2 and 3+4:	High Medium Low High Medium Low
Billet Width:
Billet Height:
Billet Corner radius Cross-section area
Round diameter to be rolled (or leave blank):
Max. Wbx/W0
New roll diameters (pass 1, 2, 3 and 4):
Discard roll diameters (pass 1, 2, 3 and 4):
New roll dia. policy if discard roll dia. changes:	No change With equal changed amount
Rolling condition and constrain
Stock material:	ANSI 1015 Carbon ANSI 1025 Carbon ANSI 1035 Carbon ANSI 1045 Carbon ANSI 1055 Carbon ANSI 1065 Carbon ANSI 1070 Carbon ANSI 9255 Spring ANSI 302 Stainless ANSI 321 Stainless ANSI 430Ti Stainless ANSI 446 Stainless ANSI 52100 Bearing Cu99.97 Al99.5
Roll and cooling:	Cast Iron and rough steel rolls, Dry Cast Iron and rough steel rolls, Water cooled Cast and smooth steel rolls, water cooled Hard cast rolls, emulsion cooled Hard metal ground rolls, water cooled Hard metal ground rolls, emulsion cooled
Exit speed in the round pass:
Rolling Temperatures for pass 1, 2, 3 and 4:
Roll gaps (partings) for pass 1, 2, 3 and 4:
	Let system determine
Expected fill ratio for the pass 1, 2, and 3:	Use system values
Expected width/height ratio for the round pass:	Use system value

This application is under development. Please come and check again. Thank you for your interest!