|
| Introduction to Sheet Forming |
|
 |
This review will provide some technical progress, business advantage and development trend of the metal sheet forming. Deep technical issue will be dealt with in other papers. <Read in Full> |
|
|
 |
|
Drawing of Wires, Rods and Bars
Drawing operations involve pulling metal (e.g., hotrolled steel) through a die by means of a tensile force applied to the exit side of the die. This article discusses drawing equipment, drawing operation, intermediate annealing for multiple-pass production, special section drawing, and residual stresses, etc. <Read in Full>
Analysis and Design of the Extrusion Process
Some semiempirical analytical techniques have been developed for computer-aided design of extrusion dies. However, these techniques are approximate and could be vastly improved by developing FEM-based computer programs for metal-flow simulation. In this article, a small-strain 2-D (axis-symmetric) elastic-plastic finite-element analysis was used to study this process. <Read in Full>
Selected Technical Issues during Sheet Forming
Selected technical issues occurred during design, analysis and manufacture processes are covered. <Read in Full>
Analysis and Design of the Extrusion Process
Some semiempirical analytical techniques have been developed for computer-aided design of extrusion dies. However, these techniques are approximate and could be vastly improved by developing FEM-based computer programs for metal-flow simulation. In this article, a small-strain 2-D (axis-symmetric) elastic-plastic finite-element analysis was used to study this process. <Read in Full>
Drawing of Wires, Rods and Bars
Drawing operations involve pulling metal (e.g., hotrolled steel) through a die by means of a tensile force applied to the exit side of the die. This article discusses drawing equipment, drawing operation, intermediate annealing for multiple-pass production, special section drawing, and residual stresses, etc. <Read in Full>
|
|
 Introduction to Extrusion
Introduction to Hot Extrusion
Introduction to Tube Drawing
Extrusion of Metals
Sheet Forming Machinery and Equipment
Introduction to Tube Drawing
Introduction to Extrusion
Introduction to Hot Extrusion
Extrusion of Metals
|
| |
|
Online Links: |
| |
Sheet Metal Forming: A Review, by William F. Hosford and John L. Duncan, from http://www.tms.org.
Optical Metal Sheet Forming Analysis, by GOM, Braunschweig, Germany, from http://www.gom.com.
Advances in Hydroforming and Stamping for Manufacturing Automotive Parts, by GOM, Braunschweig, Germany, from http://nsmwww.eng.ohio-state.edu.
Q&A: Sheet Forming, by GOM, Braunschweig, Germany, from http://tmp.cma.fr.
Process Encyclopaedia: Sheet forming, by GOM, Braunschweig, Germany, from http://www-materials.eng.cam.ac.uk.
Dieless NC forming, by Taylan Altan, from http://www2.thefabricator.com.
A Personal Look on My Involvement in the Recent History of Metal Forming Research, by Betzalel Avitzur, from http://metalforming-inc.com.
Roll Forming Tutorial - Part 1, by Corrugated Metals, from http://www.corrugated-metals.com.
Roll Forming Tutorial - Part 2, by Corrugated Metals, from http://www.corrugated-metals.com.
Roll Forming Tutorial - Part 3, by Corrugated Metals, from http://www.corrugated-metals.com.
Roll Forming Tutorial - Part 4, by Corrugated Metals, from http://www.corrugated-metals.com.
Industrial Sheetmetal Parts Measurement by Image Sequence , by Zhang Zu Xun, from http://www.paper.edu.cn.
Finite element analysis of forming of sheet metal blank in manufacturing metal/polymer macro- composite components via injection moulding , by Zhang Xin Ming, from http://www.paper.edu.cn.
Application of fuzzy neural network to laser bending process of sheetmetal , by Li Miao Quan, from http://www.paper.edu.cn.
Analysis of FCC sheet metal forming with rate-independent polycrystalline plasticity FEM , by Peng Ying Hong, from http://www.paper.edu.cn.
Finite element analysis of forming of sheet metal blank in manufacturing metal/polymer macro- composite components via injection moulding, by Zhang Xin Ming, from http://www.paper.edu.cn.
Experiment investigation of deep-drawing sheet texture evolution, by Liu Ya Zheng, from http://www.paper.edu.cn.
Simulation and experiment of curve irradiated laser bending process of titanium alloy sheet , by Li Miao Quan, from http://www.paper.edu.cn.
Process optimization of the inverting-forming of thin-walled tubes with radiused dies , by Yang He, from http://www.paper.edu.cn.
A study on a 3D FE simulation method of the NC bending process of tfhin-walled tube , by Yang He, from http://www.paper.edu.cn.
Sheet Metal Forming: A Review, by William F. Hosford, from http://www.tms.org.
Modelling and simulation of the roll forming process, by Lindgren, Michael, from http://epubl.ltu.se.
Numerical simulation of sheet metal forming for high strength steels, by Arwidson, Claes, from http://epubl.ltu.se.
download file recovery software, by Data Recovery, from http://www.datadoctor.biz.
download file recovery software, by Data Recovery, from http://www.datadoctor.biz.
download file recovery software, by Data Recovery, from http://www.datadoctor.biz.
|
| |
|
|
|
